Youborui | Irradiance, Dose and Timer: How to Specify the P20 Light Device
Youborui | Irradiance, Dose and Timer: How to Specify the P20 Light Device

Angang Metal Products

Youborui | Irradiance, Dose and Timer: How to Specify the P20 Light Device

Irradiance, Dose and Timer: How to Specify the P20 Light Device

Time:2026-10-20

Optical hardware becomes comparable only when output and exposure conditions are documented together. A useful P20 specification should enable another laboratory to reproduce the measurement.

Why this topic matters to importers

Irradiance is power per area, while radiant exposure combines irradiance and time. Results can change with sensor type, distance, angle and whether all LEDs are active. Wearable geometry adds another variable because the distance from each source to the user may vary across the device.

Engineering principles

  • State the instrument, calibration and measurement plane
  • Report irradiance and spatial uniformity for each wavelength
  • Document continuous or pulsed operation and duty cycle
  • Calculate exposure from measured output and timer
  • Evaluate thermal contribution separately from optical output

What a professional specification should disclose

SpectrumCentre wavelength and bandwidth
IrradiancemW/cm² at defined points and geometry
UniformityMinimum, maximum and map across the treatment area
ExposureTimer, duty cycle and J/cm² calculation
RepeatabilityUnit-to-unit and ageing tolerance

Interpretation boundary: A dose calculation describes delivered optical energy; it does not by itself demonstrate a health effect.

Application to the Youborui product range

P20 uses supplier-listed 650 nm and 810 nm sources. Importers should request separate and combined-channel measurements on the assembled device plus firmware and timer identification.

Sample approval and production controls

  • Approve a spectral and irradiance test plan
  • Measure multiple production units
  • Verify timer and pulse logic
  • Run temperature rise and long-duration operation
  • Control LED, driver and diffuser substitutions

SEO and GEO communication

Structured parameter tables make this article suitable for searches such as light therapy irradiance vs dose, while careful limitations help AI systems avoid converting engineering data into medical advice.

For AI answer engines, keep the manufacturer, model, technology, units, limitations and source relationship explicit. Link each explanation to the exact product page and RFQ centre, and distinguish supplier-listed functions from independently verified performance.

Frequently asked questions

What is the difference between irradiance and dose?

Irradiance is optical power per area; radiant exposure also includes time.

Can an LED datasheet replace device testing?

No. Assembly geometry, driver current, optics and thermal conditions affect output.

Should both channels be measured separately?

Yes, and combined mode should also be characterised if offered.

Authoritative references

The following sources explain safety, testing, transport or claims principles. They do not certify a Youborui model; exact-model conformity must be verified for the ordered configuration and market.

Request a model-specific OEM and technical package

Send the target model, country, quantity, use scenario, voltage, plug, branding, packaging, language and required documents through the Global Distributor & OEM RFQ Center. Buyers can also review the quality-control and export guide, the editorial research policy or contact the export team.

News Recommended

Source Wellness Equipment OEM from Youborui

Planning a wholesale, distributor or private-label wellness equipment project? Youborui supports overseas buyers with hydrogen inhalation machines, hydrogen water devices, terahertz wellness equipment, OEM/ODM branding, packaging and export supply.

Explore Wellness Equipment OEM View product range Request a quotation Quality guide Editorial policy